Kodak DCS600 Digital Camera User Manual


 
1-3
1
Important Info
Warnings
To prevent fire or shock hazard, use only the recommended accessories and
attachments.
Use extreme care when handling PC Cards, as they are easily damaged. If dropped,
the PC Card may be destroyed, resulting in the loss of all data on the card.
Do not remove a PC Card, battery, or AC adapter from the camera while the Card
Present icon on the Back Status LCD panel or the Card Busy LED inside the
Battery/PC Card door are blinking. The blinking indicates that data is being read
from or written to the PC Card. You may lose data if you remove a card at this
time. Refer to “Inserting/Removing PC Cards” on page 5-3.
You should operate your camera only from the type of power source indicated on
the name plate of the AC adapter. A line voltage outside this range can destroy the
AC adapter and/or the camera.
Use only the AC adapter (either included with your camera or available from
Kodak as an accessory). Do not plug other adapters into the camera.
The AC adapter is for indoor use only.
Do not use the supplied AC adapter for any purpose other than for the DCS 600
Series camera.
The Battery/PC Card door should always be closed when you are using the camera.
If a shock is applied to the camera, the battery may fall out causing loss of data if
an image is currently being saved to the PC Card.
REAR
SLOW
AUTO
ISO
BKT
CUSTOM
PC Card icon