Filter
Top Products
13-35
13
Advanced
4 Autofocus activated when the Shutter
Release button is lightly pressed:
At the default setting, autofocus is activated and
the lens starts focusing when the Shutter
Release button is lightly pressed. To disable
autofocus, select 4-1. Use the AF start button to
start autofocus in this case
Activated 4-0
Disabled 4-1
5 AE Lock:
At the default setting, exposure is locked based
on the conditions detected when the
AE-L/AF-L button is pressed. In this case, the
shutter speed/aperture combination can be
shifted in Programmed Auto Exposure mode,
the shutter speed can be shifted in Shutter-
Priority Auto Exposure mode, and aperture can
be shifted in Aperture-Priority Auto Exposure
mode. To lock the shutter speed and aperture,
select 5-1.
Detected value 5-0
Controlled value 5-1
6 Direction of Command Dial rotation:
At the default setting, turning the Command
dials counterclockwise increases the selected
value or selects a certain function. To change
the direction to clockwise, select 6-1.
Default:
counterclockwise
6-0
Opposite:
clockwise
6-1
7 AE Lock when Shutter Release button is
lightly pressed:
At the default setting, exposure does not lock
when the Shutter Release button is lightly
pressed. To lock exposure when the Shutter
Release button is lightly pressed, select 7-1.
Disabled 7-0
Activated 7-1
8 Reserved 8-0
9 Drive rate in C
H (DCS 620 and 620x only)
At the default setting, the frame rate is 3.5 fps.
To change the frame rate to 3.0 fps, select 9-1.
Custom Setting #9 is not available on the DCS
660 or 660M. The frame rate is always 1.0 fps.
3.5 fps 9-0
3.0 fps 9-1
Number Function Your Option
LCD
Panel