Filter
Top Products
12-10
Tagging Images
You can tag one or more images then perform operations on the tagged (or untagged)
images using the camera or the DCS Host software. On the camera, you can specify that
the tagged images be processed (page 6-2), transmitted, or
NOT deleted (page 12-14).
(Image transmission is described in the DCS Transmission kit which can be purchases
separately.)
In the DCS Host software you can select tagged (or untagged) images and perform a
variety of operations. Refer to the KODAK PROFESSIONAL DCS Host Software User’s
Manual on the DCS Host Software CD included with your camera.
1 Select the desired review mode.
2 Select an image.
3 Press the Record/Tag button.
Do not hold the Record/Tag
button for more than one second
or you will activate the
microphone used for attaching
sound files to images.
A Tag icon appears above the
image at the top right of the
Menu Bar.
☛ You can also tag the last image
captured until the camera
enters PowerSave mode or you
perform another operation
(regardless of whether you
have selected a Review mode).
Press the Record/Tag button.
4 To remove a tag, press and
release the Record/Tag button
again.
ISO
BKT CSM
L