Filter
Top Products
10-14
Intervalometer
Your camera has an Intervalometer which you can set so that a sequence of images are
captured automatically at specified intervals over a specified period of time. You might
use the Intervalometer to capture a flower bud opening or for unattended surveillance. You
can set the following:
✔ Number of frames to be captured
✔ Interval between exposures
✔ Delay before the timer begins
✔ Enable or disable the Intervalometer
The Intervalometer is disabled automatically after the specified time has elapsed, even if
the specified number of images have not been captured. For example, if you set the
Intervalometer for fifteen exposures at one second intervals, the camera would stop
capturing images after fifteen seconds, regardless of whether fifteen images had been
captured.
☛ While the Intervalometer is enabled, the camera does not enter PowerSave mode.
1 Select the Menu icon, then
choose Main Menu from the
dropdown menu. Refer to
“Navigation Techniques” on
page 2-14.
2 Choose Intervalometer from the
Main menu.
The Intervalometer screen
appears.
3 Select the desired setting.