Filter
Top Products
A-61169 July 2003 2-1
2 Using the Scanner
This chapter provides the following operational procedures:
• Turning on the scanner
• Document preparation
• Adjusting the input tray, side guides and output tray
• Scanning documents
• Feeding long documents
• Continuous and manual feeding
Other functions, such as calibration, using the programmable keys, using
multi-feed detection, setting the elevator level, etc. can be performed using
the Operator Control Panel. See Chapter 3, Operator Control Panel
Functions for procedures.
Turning on the scanner
To turn on the scanner:
• Toggle the power switch to the On position.
When the menu bar is displayed on the Operator Control Panel, the
scanner is Ready.
IMPORTANT: Always power-up the scanner to its Ready state before
powering-up the host computer.
On/Off switch