Filter
Top Products
3-10 A-61169 July 2003
Changing the display
contrast
This setting allows you to adjust the contrast of the display screen from
0 to 4. 0 = lightest, 4 = darkest.
To change the display contrast:
1. Select the Diagnostics Settings menu icon.
2. Use the right or left arrow to navigate to the Settings function.
3. Use the down arrow to select Change Display Contrast.
4. Select Return.
5. Use the up and down arrows to select the desired contrast.
6. Select Return.
Changing the SCSI ID This setting allows you to enter the SCSI ID number (0 to 7). The SCSI ID
should not be changed unless directed to do so by your integrator or
Kodak Field Representative.
If the SCSI ID has been changed, you must reboot the scanner. After the
scanner has been powered up and completed the self-test, reboot the
host PC.
To change the SCSI ID:
1. Select the Diagnostics Settings menu icon.
2. Use the right or left arrow to navigate to the Settings function.