Filter
Top Products
A-61169 July 2003 3-7
Performing a print test The print test checks to be sure the ink jets in the Document Printer are
functioning properly.
To perform a print test:
1. Select the Diagnostics Settings menu icon.
2. Use the right or left arrow to navigate to the Diagnostics function.
3. Use the down arrow to select Run print test.
4. Select Return.
5. Feed a blank(s) sheet of paper.
6. Press Start/Resume.
7. Press Stop/Pause. The documents in the output tray will display the
results of the print test.
8. Remove the documents from the output tray and evaluate the
appearance of the test pattern.
• If the pattern is complete, you are ready to begin.
• If the pattern is not legible:
− Check to see that the print cartridge is installed properly and
purge the ink cartridge if necessary. Repeat the print test. See
Chapter 4, Document Printer and Patch Reader, for more
information.
− If the pattern is still not legible, replace the ink cartridge.