Filter
Top Products
A-61169 July 2003 5-21
Customizing the side
guides for self-
centering feeding
A spacer is installed in the output tray, which allows the side guides to
move independently. If you want the side guides to move together (self-
centering) you can install the geared spacer that is included with the
scanner. To change the side guides for self-centering feeding, follow the
procedures below.
Tools needed: Phillips Head Screwdriver
1. Pull the output tray forward and remove it.
2. Open the side guides to the widest position, remove the end stop and
turn the tray upside down.
End stop