Filter
Top Products
14 GETTING UP AND RUNNING
GETTING UP AND RUNNING
INSERTING THE BATTERY
This digital camera uses two AA-size alkaline batteries or NI-MH batteries, but recharge-
able NI-MH batteries are recommended because of longer life.When using NI-MH batter-
ies, fully recharge them with a battery charger suitable for complex electronic equipment.
Please consult your vendor about an appropriate charger. Before using the battery, read
the safety warnings on pages 3 and 6 of this manual. When replacing the battery, the
camera should be turned off.
Slide the battery-chamber door toward the front of the camera to release the safety catch
(1). Open the door.
Insert the AA batteries as shown; make sure the positive and neg-
ative battery terminals are oriented correctly (2).
Close the battery-chamber door and slide it toward the back of
the camera to engage the safety catch.
After installing the battery, the set-time/date message
may appear on the monitor.The clock and calendar is
set in the section 3 of the setup menu (p. 20). An
internal battery protects the clock, calender, and
memory settings for more than 24 hours if the camera
is used for at least 5 minutes before removing the bat-
tery.
Carbon-zinc and nickel zinc battery can not be used
for this camera.
1
2