Filter
Top Products
24 RECORDING - BASIC OPERATION
LCD MONITOR DISPLAY - BASIC
If the shutter speed falls below the point where the camera can be
hand held safely, the camera-shake warning indicator will appear on
the monitor. Camera shake is slight blurring caused by subtle hand
motion and is more pronounced at the telephoto position of the lens
than at the wide-angle position. Although the warning appears, the
shutter can still be released. If the warning appears, place the camera
on a tripod or use the built-in flash.
CAMERA-SHAKE WARNING
Image size (p. 43)
Image quality (p. 43)
Battery-condition indicator (p. 15)
Drive mode (p. 38)
Frame counter (p. 44)
Focus signal (p. 27)
Recording mode
Flash modes (p. 36)
Camera-shake warning (p. 24)
Focus frame
LCD monitor