Filter
Top Products
90
CONNECTING THE CAMERA TO A COMPUTER
Confirm the battery has sufficient power before connecting the camera to a computer.The use of the
AC adapter (sold separately) is recommended over the use of the battery. For users with Windows 98
or 98SE, read the section on page 93 on how to install the necessary USB driver before connecting
the camera to a computer.
1. Start up the computer.The computer must be turned on before
connecting the camera.
2. Insert the memory card into the camera.To change the memory
card while the camera is connected to a computer, see page 100.
3. Slide the AV-out terminal / USB-port cover open. Insert the small
plug of the USB cable into the camera. Make sure the plug is firm-
ly attached.
4. Attach the other end of the USB cable to the computer’s USB
port. Make sure the plug is firmly attached. The camera should be
connected directly to the computer’s USB port. Attaching the cam-
era to a USB hub may prevent the camera from operating proper-
ly.
5Turn on the camera to initiate the USB connection.While the cam-
era is connected to a computer, the data-transfer screen
will be displayed.
D
ATA-TRANSFER MODE