Konica Minolta Dimage X20 Digital Camera User Manual


 
54 RECORDING - ADVANCED OPERATION
DATE IMPRINTING
Every time a still image is recorded, it is stored with an exif tag that contains the date and time
of recording as well as shooting information. This information can be viewed with the camera in
the playback mode, or on a computer with the DiMAGE Viewer software.
Camera Notes
The date and time are imprinted in the lower right
corner of the image when viewed horizontally. It is
printed directly on the photograph writing over the
image information.The date can be imprinted in
three formats: year / month / day, month / day /
year, and day / month / year.The date and date
format are set in section 3 of the setup menu (p.
88).
The date and time of recording can be printed directly on the image.
The imprinting function must be activated before the image is taken.
Once activated, the date will continue to be imprinted until the func-
tion is reset; a yellow bar is displayed behind the frame counter on the
monitor to indicate the imprinting function is active.
Date imprinting is activated with the section 1 of the recording-mode
menu (p. 48). Date imprinting has two menu options.The YYYY/MM/DD
option prints the date.The MM/DD/hr:min option prints the month, day,
and time of recording.
Date-imprinting indicator