Filter
Top Products
8180 Setup mode
FOLDER NAME
All recorded images are stored in folders on the memory card. Folder names
come in two formats, standard and date.
Standard folders have an eight character name. The initial folder is named
100KM033. The first three digits are the folder’s serial number, which increases
by one each time a new folder is created. The next two letters refer to Konica
Minolta, and the last three numbers indicate the camera used; 033 indicates a
DiMAGE X1.
A date folder name also starts with the three digit serial number and is followed
by one register for the year, two register for the month, and two registers for the
day: 101YMMDD. The folder 10150824 was created in 2005 on August 24th.
With the date folder format selected, when an image is recorded a new folder
with the day’s date is created. All images recorded that day are placed in that folder. Images record-
ed on a different day are placed in a new folder with the corresponding date. For more information
on folder organization and file names, see page 88.
100KM033
(Standard)
10150824
(Date)
DATE AND TIME
The date/time setup screen is opened from section 3 of the setup menu (p. 73). See page 22 for
how to set the date and time. Date format also can be changed.
VIDEO OUTPUT
Camera images can be displayed on a television. The video output can be changed between NTSC
and PAL in section 4 of the setup menu (p. 73). North America uses the NTSC standard and Europe
uses the PAL standard. Check which standard is used in your region to play back images on your
television set.
VIEWING IMAGES ON A TELEVISION
The supplied AV cable is used to view camera images on your television.
1. Turn off the television and the camera.
2. Insert the small plug of the AV cable into the cradle terminal.
Insert the plug in straight, never at an angle. The arrow mark
on the plug should face the back of the cradle.
3. Plug the other end of the AV cable into the video and audio
input terminals on the television. The yellow plug is for the
video output. The white plug is for the monaural audio output.
4. Place the camera in the cradle with the LCD monitor to the
front.
5. Turn the television on and change the television to the video
channel.
6. Turn the camera on. The playback display is visible on the
television screen. The camera’s monitors do not activate when
the camera is attached to a television.
7. View images as described in the playback section.
3
2
6
When disconnecting, turn off the camera first, remove it from the cradle, and then unplug the AV
cable.
Cradle can power the camera. Connect the power cord to the cradle before attaching the AV cable
or camera. When disconnecting, unplug the power cord last.