Filter
Top Products
E21
Reference Section
Connecting the Camera to a Printer (Direct Print)
Users of PictBridge-compatible (F17) printers can connect the camera directly to
the printer and print pictures without using a computer.
Connecting the Camera to a Printer
1 Turn off the camera.
2 Turn on the printer.
• Check the printer settings.
3 Connect the camera to the printer using the included USB cable.
• Be sure that the plug is oriented correctly. When disconnecting the cable, do not pull
the plug at an angle.
4 The camera is automatically turned on.
• When connected correctly, the PictBridge startup screen (1) is displayed on the
monitor screen of the camera. Then the Print selection screen (2) is displayed.
B Notes on Power Source
• When connecting the camera to a printer, use a fully charged battery to prevent the camera from
turning off unexpectedly.
• If the AC Adapter EH-5b and the Power Connector EP-5A (available separately) (E103) are used,
COOLPIX P7700 can be powered from an electrical outlet. Do not, under any circumstances, use
an AC Adapter other than the EH-5b or a Power Connector other than the EP-5A. Failure to
observe this precaution could result in overheating or damage to the camera.
32
32
NO.
Print selection
2012
15/11