Filter
Top Products
58
Features That Can Be Set Using the Multi Selector
Shooting Features
B High Temperature Caution
If you are taking pictures repeatedly with the flash within a short period of time, the flash unit and its
surrounding area can become hot. Before lowering the flash, be sure to allow the flash unit and its
surrounding area to cool down.
C Lowering the Flash
When not using the flash, gently push to lower the flash until it clicks
shut.
C Effective Range of the Built-in Flash
The built-in flash has a range of about 0.5 to 10 m (1 ft 8 in. to 32 ft) for wide-angle position, and
about 0.5 to 5.5 m (1 ft 8 in. to 18 ft) for telephoto zoom position (when ISO sensitivity is set to
Auto).
C Flash Mode Setting
• The setting varies with shooting mode. See “Available Functions” (A55) and “List of the Default
Settings” (A64) for more information.
• Some features cannot be used in combination with other menu settings. See “Features Not
Available in Combination” (A79) for more information.
• The changed flash mode setting applied in the following situations is saved in the camera’s
memory even after the camera is turned off.
- When shooting mode A, B, C or D is used
- When V (auto with red-eye reduction) is selected in A (auto) mode
C Auto with Red-eye Reduction
This camera uses advanced red-eye reduction (“In-Camera Red-Eye Fix”).
If the camera detects “red-eye“ when a picture is taken, Nikon's own In-Camera Red-Eye Fix processes
the image before it is recorded.
Note the following when taking pictures:
• The time required to save the picture increases slightly.
• Advanced red-eye reduction may not produce the desired results in some situations.
• In extremely rare instances, areas not subject to red-eye may be affected by advanced red-eye
reduction processing. In these cases, choose another mode and try again.
C External Flash Unit
You can attach the Nikon Speedlights to the camera's accessory shoe (A1) to take pictures.
See “Speedlights (External Flash Unit)” (A87) for more information.