E50
Shooting Menu (
A
,
B
,
C
or
D
Mode)
Reference Section
2 Frame the subject at the center of the border,
and press the k button.
• The subject is registered.
• When the camera is unable to focus on the subject, the
border lights in red. Change the composition and try
again.
• Once the subject is registered, it is framed by a yellow
focus area display, and subject tracking begins.
• Press the k button to cancel the registration of the
subject.
• If the camera loses sight of the subject, the focus area
display disappears; register the subject again.
3 Press the shutter-release button all the way to
take the picture.
• If the camera focuses on the focus area when the
shutter-release button is pressed halfway, the focus
area display lights in green and the focus is locked.
• If the shutter-release button is pressed halfway while
the focus area is not displayed, the camera focuses the
subject at the center of the frame.
B Notes on Subject Tracking
• The digital zoom is not available.
• Set the zoom position, flash mode, focus mode, or menu settings before registering a subject. If
any of these are changed after a subject is registered, the subject will be canceled.
• During certain conditions, such as when the subject is moving quickly, when there is a large
amount of camera shake, or when there are multiple subjects that look alike, the camera may not
be able to register or track a subject, or the camera may track a different subject. Additionally, the
subject may not be tracked properly depending on factors such as the subject’s size and
brightness.
• When the camera enters standby mode (A23), the registration of the subject is canceled. To
prevent this, setting a longer time for the auto off function (E78) is recommended.
• Some features cannot be used in combination with other menu settings. See “Features Not
Available in Combination“ (A79) for more information.
1/250
1/250
F5.6
F5.6
1/250 F5.6
1280
1280
1280
Start
Start
Start
1/250
1/250
F5.6
F5.6
1/250 F5.6
End
End
End
1/250
1/250
1/250 F5.6
F5.6
F5.6