Filter
Top Products
71
Features That Can Be Set Using the d (Menu) Button (Shooting Mode)
Shooting Features
Options Available in the Shooting Menu
Option Description A
Custom Picture
Control
(COOLPIX Custom
Picture Control)
Allow you to store the customized settings based in
COOLPIX Picture Control, which can set picture editing
options for recording images according to the shooting
scene or your preferences.
E42
Metering
Select the method that the camera uses to measure the
brightness of the subject. The camera adjusts the
exposure, which is a combination of shutter speed and
aperture value, based on the brightness measurement. The
default setting is Matrix.
E43
Continuous
Set the mode used for taking a series of pictures.
• The default setting is Single (i.e. only one picture is
captured at a time).
• When Continuous H, Continuous M, Continuous L,
or BSS (A39) is set, the pictures are shot continuously
while the shutter-release button is fully held down.
• If Continuous H: 120 fps, Continuous H: 60 fps, or
Multi-shot 16 is set, the specified number of pictures
are shot continuously when the shutter-release button is
fully held down.
• If the Intvl timer shooting is set, the pictures are shot
continuously at the set interval of 30 s, 1 min, 5 min, or
10 min when the shutter-release button is fully held
down once.
E44
AF area mode
Set how the camera determines the focus area using the
autofocus to Face priority (A85), Auto, Manual,
Center (normal), Center (wide), Subject tracking or
Target finding AF (A84).
• The AF area mode can also be selected by pressing the
multi selector K (G).
E47
Autofocus mode
When Single AF (default setting) is selected, the camera
focuses only while the shutter-release button is pressed
halfway. When Full-time AF is selected, the camera
focuses even when the shutter-release button is not
pressed halfway. You may hear the sound of the camera
focusing.
E51
Flash exp. comp.
Adjust the flash output. Use this option when the flash is
too bright or too dark. The default setting is 0.0.
E51
Noise reduction
filter
Set the strength of the noise reduction function that is
normally performed when recording the picture. The
default setting is Normal.
E52