Filter
Top Products
E105
Shooting with Remote Control ML-L3
Reference Section
4 Aim the transmitter at the infrared receiver on
the front of the camera (A1) and press the
transmission button.
• Press the transmission button from a distance of 5 m
(16 ft) or less.
• In the quick-response remote mode, once the subject
is in focus, the shutter is released.
• When the time for self-timer is set to Z 10s (10
seconds) or Z 2s (2 seconds), the self-timer lamp
flashes when the subject is in focus, and then about one second before the shutter is
released, the lamp stops flashing and remains lit. To stop the self-timer before a
picture is taken, press the transmission button again.
• In the self-timer remote control mode, the remote control mode is set to Z (quick-
response remote) when the shutter is released.
Replacing the Battery for Remote Control ML-L3 (3V CR2025 Lithium
Battery)
• When changing the remote control battery, be sure that the battery’s positive (+) and
negative (-) terminals are oriented correctly.
• Be sure to read and follow the warnings of “For Your Safety” (Avi) and for “The Battery”
(F10).
B Notes on the Remote Control
• The Remote Control may not function even from a distance of 5 m (16 ft) or less when shooting in
backlit conditions.
• Some features cannot be used in combination with other menu settings. See “Features Not
Available in Combination“ (A79) for more information.
C More Information
See “Self-timer: After Release“ (E73) for more information.