Filter
Top Products
E41
Quick Menu
Reference Section
1 Quick adjust is not available in Neutral, Monochrome, Custom 1 and Custom 2.
The values set manually are disabled if quick adjust is used after manual setting.
2Not displayed for Monochrome.
3 Only displayed for Monochrome.
B Notes on Image sharpening
• The effects of Image sharpening cannot be previewed on the monitor during shooting. Check
the results in playback mode.
• In h (movie custom setting) mode, the image sharping effect is fixed at A (auto).
B Note on Contrast
When Active D-Lighting (E53) is set to settings other than Off, the J mark is displayed for
Contrast and contrast cannot be adjusted.
B Contrast, Saturation and A (Auto)
• Results for contrast and saturation vary with the exposure, and the position and size of the subject
in the frame.
• The setting for the COOLPIX Picture Control which has A (auto) selected for either Contrast or
Saturation is displayed in green in the COOLPIX Picture Control grid.
C Options that Can Be Adjusted in Custom 1 and Custom 2
The same option as that of the original COOLPIX Picture Control can be adjusted if Custom 1 or
Custom 2 is selected.
Toning
3
Control the tint used in monochrome photographs from B&W
(black-and-white, the default setting), Sepia, and Cyanotype
(blue-tinted monochrome).
Pressing the rotary multi selector I when Sepia or Cyanotype
is selected enables you to choose from seven levels of saturation.
Press J or K to adjust the saturation.
Option Description