Filter
Top Products
185
Menu Guide—Custom Settings
Option Description
[+/-] & CMD Dial
(default)
CMD Dial only
Exposure compensation set by rotating command dial only. Dial
used depends on option selected for Custom Setting f5.
Exposure compensation set by pressing button and rotating
main command dial.
Custom Setting f5
On
Sub-command dial
Main command dial
Sub-command dialMain command dial
Sub-command dial
Sub-command dial
Off
Exposure
mode
S
A
M
P
N/A
Highlight b5 Exposure comp. in the second level of the CSM menu ( 171)
and press the multi selector to the right. Press the multi selector up or down
to highlight an option, then press to the right to make a selection.
Custom Setting b6: Center Weight
When calculating exposure, center-weighted me-
tering assigns the greatest weight to a circle in
the center of the frame. The diameter (φ) of this
circle can be selected from 6, 8, 10, and 13 mm
(the default option is 8 mm). Highlight b6 Center
weight in the second level of the CSM menu (
171) and press the multi selector to the right.
Press the multi selector up or down to highlight
an option, then press to the right to make a selec-
tion.
OK
ø 8mm
ø10mm
ø13mm
8
10
13
Average
ø 6mm
6
b6
Center weight area
CSM MENU
Non-CPU Lenses
The option chosen for Custom Setting b6 applies only to CPU lenses. When a non-CPU
lens is attached, the size of the area assigned the greatest weight in center-weighted
metering is 8 mm, regardless of the option selected for Custom Setting b6 or for the
Non-CPU lens data option in the shooting menu.