Filter
Top Products
205
Menu Guide—Custom Settings
Option Description
Hold
Default
(default)
Changes to settings made by rotating command dial while button is held
down.
Settings can be changed by rotating command dial even after button is re-
leased. To put change into effect and return to normal operation, press but-
ton again, press shutter-release button halfway, or press , , , ,
ISO, QUAL, or WB button. Unless auto meter off is set to No limit or the
camera is powered by optional EH-6 AC adapter, normal functioning will be
restored automatically if no operations are performed for about 20 s.
Highlight f6 Buttons and dials in the second level of the CSM menu (
172) and press the multi selector to the right. Press the multi selector up or
down to highlight an option, then press to the right to make a selection.
Custom Setting f7: No CF Card?
This option can be used to enable the shutter
re lease when no memory card is inserted in the
cam era. Note that when photographs are being
cap tured to a computer using Nikon Capture 4
Cam era Control, pho to graphs are not recorded to
the cam era mem o ry card and the shutter release
will be en abled re gard less of the setting chosen
for this option.
Highlight f7 No CF card? in the second level of the CSM menu ( 172) and
press the multi selector to the right. Press the multi selector up or down to
highlight an option, then press to the right to make a selection.
OK
f7
Disable shutter
if no CF card
CSM MENU
Off
OnON
OFF
Option Description
Off Shutter-release button enabled even when no memory card is inserted.
On
(default)
Shutter-release button disabled when no memory card is inserted.