Filter
Top Products
209
Menu Guide—The Setup Menu
Video Mode
Before connecting your camera to a video device
such as a television or VCR ( 222), choose a vid-
eo mode setting that matches the video standard
used in the device. Highlight Video mode in the
setup menu (
206) and press the multi selector
to the right. Press the multi selector up or down
to highlight an option, then press to the right to
make a selection.
OK
Video mode
NTSC
PA L
SET UP
Option Description
NTSC Use when connecting camera to NTSC devices.
PAL
Use when connecting camera to PAL devices. Note that number of pixels in
output is selectively reduced, causing drop in resolution.
Language
Use the Language option to choose a language
for camera menus and messages. See “First
Steps: Step 3—Choose a Language” ( 18).
Date
Date is used to set the camera clock to the cur-
rent date and time. See “First Steps: Step 4—Set
the Time and Date” ( 19).
08
30
42
08
13
2003
Date
Set
OK
YMD
HMS
SET UP
OK
Language
De
En
Es
Fr
SET UP
Deutsch
English
Español
Français
Video Output
The default video standard varies with the country or region of purchase.