Filter
Top Products
106
7
Settings
All reset
This function lets you choose whether or not to save the current camera
settings after the power is turned off. The settings affected by [ALL
RESET] are listed on the next page.
The [ALL RESET] setting ([ON]/[OFF]) applies to all the modes. If [ALL
RESET] is set to [OFF] in one shooting mode, this setting applies to all the
other modes, both shooting and playback.
ON All settings are returned to the factory default settings after the power is
turned off. (factory default setting)
Example: If [ALL RESET] is set to [ON] and [K] is changed to [SQ1],
[K] returns to the factory default setting ([HQ]) when the
camera is turned on again.
OFF The settings made before the power is turned off are saved.
Top menu [SETUP] [ALL RESET] [OFF] / [ON]
Top menu [MODE MENU] [SETUP] [ALL RESET] [OFF] / [ON]
g“Menus” (P.16)
Note
• My Mode settings and the settings in the [SETUP] tab in the [MODE MENU]
([ALL RESET], [W], [8] etc.) are saved even when [ALL RESET] is set to
[ON].
Mode dial
Mode dial
d4250_e_00_0_bookfile.book Page 106 Friday, December 24, 2004 11:45 AM