Filter
Top Products
Recording movies
73
5
More useful functions
This function reduces the blur incurred by camera movement when taking
movies. The camera moves the image-capture area of the CCD according
to the movement of the subject, reducing blur when recording. The images
are recorded slightly larger when [h] is set to [ON].
Top menu [h] [OFF] / [ON] g“Menus” (P.16)
1 Take the picture.
Note
• Depending on the card, the remaining recording time may drop rapidly during
recording. Try using the card again after formatting it with your camera.
g “Formatting” (P.104)
•In n mode, the flash and manual focus (MF) cannot be used.
Camera movement compensation
Note
• Depending on the actual amount of shake, there may be situations where the
anti-shake system is not able to remove all the shaking from the movie.
• On the other hand, if your camera is mounted firmly, like on a tripod, turn off the
anti-shake system. The display may move unexpectedly when the camera tries
to compensate for any movement by the subject you are recording.
• When you are recording movies, as long as you do not press the shutter button
to stop the filming, the camera will continue to record until you run out of space
on your memory card.
• A long recorded movie cannot be edited. (P.95)
• If a single movie recording uses up all of the card’s memory, create space on
the card by erasing the movie or downloading it to a computer.
Notes for recording long movies
Mode dial
HQ
HQ
00
00
:30
30
00:30
0.0
0.0
Displayed during
camera movement
compensation.
d4250_e_00_0_bookfile.book Page 73 Friday, December 24, 2004 11:45 AM