Filter
Top Products
Connecting the camera to a computer
148
9
Connecting the camera to a computer
2 Plug the other end of the
USB cable into the
camera’s multi-connector.
• The monitor turns on and the
selection screen for the USB
connection is displayed.
3 Select [PC] and press N.
• If the selection screen
disappears, press the POWER switch to turn
the camera on again or disconnect the USB
cable and repeat the procedure from Step 2.
4 The camera is recognized by the computer.
• Windows 98SE/Me/2000
When you connect the camera to your computer for the first time, the
computer attempts to recognize the camera. Click “OK” to exit the message
that is displayed. The camera is recognized as a “Removable Disk”.
•Windows XP
When the camera is connected to the computer, the screen for selecting an
image file operation is displayed. As OLYMPUS Master will be used to
download images, click “Cancel”.
•Mac OS X
The iPhoto program is the default application for managing digital images.
When you connect your digital camera for the first time, the iPhoto application
starts automatically, so close this application and start OLYMPUS Master.
Note
• The camera functions are disabled while the camera is connected to a
computer.
Multi-connector
Connector cover
USB
SELECT GO
OK
P C
PRINT
EXIT
d4250_e_00_0_bookfile.book Page 148 Friday, December 24, 2004 11:45 AM