Filter
Top Products
37
Basic shooting functions
3
Taking close-up pictures (macro/super macro mode)
Focusing is usually slow when you get close to a subject (W: 8 cm/3.2" to
60 cm/23.6", T: 60 cm/23.6" to 120 cm/47.2"). However, in macro mode
focusing is performed quickly.
& When the optical zoom lever is at the maximum wide position and you are as
close as 8 cm/3.2" to your subject, you can fill the entire frame with a 9.0 × 6.6
cm (3.5" × 2.6") subject.
% This mode lets you shoot from as close as 2 cm/0.8" to your subject. Subjects
measuring approximately 3.4 × 2.5 cm (1.3" × 1.0") can be captured on the
monitor. In the % mode, normal shooting is also possible, but the position of
the zoom is fixed automatically and cannot be changed.
1 Press the & button repeatedly to
change the macro setting to [&] or
[%].
g“Direct buttons” (P.13)
• If no operation is performed for about 3
seconds, the macro mode is set and the
mode selection screen is automatically
exited.
&
(Macro)
%
(Super macro)
Mode dial
& button
0030
1/1000
1/1000
F2.8
F2.8
0.0
0.0
&
2592 1944
2592 1944
HQ
HQ
30
30
30
d4250_e_00_0_bookfile.book Page 37 Friday, December 24, 2004 11:45 AM