Filter
Top Products
74
5
More useful functions
Sequential shooting
There are two sequential shooting modes: sequential shooting and auto
bracketing.
To set a sequential shooting mode, go to [DRIVE] on the mode menu.
o Shoots 1 frame at a time when the shutter button is pressed. (Normal,
single-frame shooting mode)
j The focus, exposure and white balance are locked at the first frame.
Approx. 4 frames at 1.2 frames/sec. (in HQ mode)
7 Under some conditions, you may obtain better results shooting with
exposure compensation than by using the exposure setting considered
optimal by the camera.
When [7] is set, the exposure is changed automatically for each frame
when you start shooting. The exposure differential and number of frames
can be selected in the menus. The focus and white balance are locked at
the first frame.
Ex: When [7] is set to [±1.0] [×3]
Top menu [MODE MENU] [CAMERA] [DRIVE] [j]
g“Menus” (P.16)
1 Take the picture.
• Press the shutter button fully and keep it pressed. The camera will take
pictures in sequence until you release the button.
-1.0 0.0 +1.0
Sequential shooting
Note
• The number of frames that can be taken during sequential mode differs
according to the record mode settings.
Mode dial
d4250_e_00_0_bookfile.book Page 74 Friday, December 24, 2004 11:45 AM