Filter
Top Products
Direct printing (PictBridge)
133
Printing pictures
8
If an error code appears on the camera’s monitor during direct print setting or
printing, see the following table.
For more details, refer to the printer’s instruction manual.
If an error code is displayed
Monitor indication Possible cause Corrective action
NO CONNECTION
The camera is not connected
to the printer correctly.
Disconnect the camera and
connect it again correctly.
NO PAPER
There is no paper in the
printer.
Load some paper in the
printer.
NO INK
The printer has run out of
ink.
Replace the ink cartridge in
the printer.
JAMMED
The paper is jammed. Remove the jammed paper.
SETTINGS CHANGED
The printer’s paper cassette
has been removed or the
printer has been operated while
making settings on the camera.
Do not operate the printer
while making settings on the
camera.
PRINT ERROR
There is a problem with the
printer and/or camera.
Turn off camera and printer.
Check the printer and
remedy any problems before
turning the power on again.
TIPS
• If an error code other than those shown above is displayed, see “Error
codes” (P.158).
d4250_e_00_0_bookfile.book Page 133 Friday, December 24, 2004 11:45 AM