Filter
Top Products
28 VQT2P49 VQT2P49 29
Taking pictures with your own settings
[NORMAL PICTURE] Mode
Recording Mode:
■
To use zoom
(→30)
■
To use flash
(→36)
■
To adjust picture
brightness
(→41)
■
To take close-up pictures
(→38)
■
To adjust coloring
(→61)
●
If a warning is displayed about jitter, use
[STABILIZER], a tripod, or [SELFTIMER].
●
If aperture value or shutter speed is displayed in red,
correct exposure has not been achieved. Use flash or
change [SENSITIVITY] settings.
Aperture value Shutter speed
Jitter alert
display
Using [REC] menu to change settings and set up your own recording environment.
Shutter button
Open the lens cover
The power is turned on.
Display the screen for Recording
Mode selection
Touch [NORMAL PICTURE]
Take a picture
Press halfway
(press lightly to focus)
Press fully
(press the button all
the way to record)
Focus display
(when focus aligned:
flashing → illuminated)
AF area
(aligns focus with subject;
when complete: red → green)
Align focus for desired composition
Useful when subject is not in center of picture.
First adjust focus according to subject
Hold down
halfway
Align the AF
area with the
subject
AF area
●
Subjects/environments which may
make focusing difficult:
•
Fast-moving or extremely bright objects,
or objects with no color contrast.
• Taking pictures through glass or near
objects emitting light. In dark, or with
significant jitter.
•
When too close to object or when
taking pictures of both distant and close
objects together in the same picture.
●
We recommend using the ‘Face
Detection’ function when taking
pictures of people (→58).
Return to desired composition
Press fully
AF area
●
The focus display flashes and beep sounds when focus is not
aligned.
Use the focus range displayed in red as a reference.
Even if the focus display is lit, the camera may be unable to bring
the subject into focus if it is out of range.
●
AF area is displayed larger in dark conditions or when using
Digital Zoom.
●
Most displays are temporarily cleared from screen when the
shutter button is pressed halfway.
Focus range
Direction detection function
Still pictures taken with the camera held vertically are automatically played back vertically.
(Only when [ROTATE DISP.] is set to [ON])
●
Still pictures taken with the lens surface facing directly up or down and still pictures
taken on other cameras may not be rotated. Additionally, still pictures taken while
holding the camera upside down are not rotated automatically.
●
Motion pictures are not displayed vertically.