Panasonic DMC-FP3 Camcorder User Manual


 
30 VQT2P49 VQT2P49 31
Taking pictures with zoom
Recording Mode:
Zoom In/Out
Capture a wider
area (wide-angle)
Enlarge the subject
(telephoto)
W side (wide-angle):
1 x
T side (telephoto):
up to 4 x
Focus range
Zoom ratio
(approx.)
Zoom bar
Adjust the focus after adjusting the zoom.
Optical Zoom and Extended Optical Zoom (EZ)
Automatically switches to ‘Optical Zoom’ when using maximum picture size (56), and
to ‘Extended Optical Zoom’ (for further zooming) otherwise. (EZ is short for ‘Extended
Optical Zoom’.)
• Optical Zoom • Extended Optical Zoom
Zoom bar
( displayed)
‘Optical Zoom’ offers 4 x magnification. At a lower recording pixel level, ‘Extended Optical
Zoom’ can be used to zoom up to 8.4 x. For zooming in even closer, ‘Digital Zoom’ is
available.
Maximum zoom ratios by picture size
Optical Zoom Extended Optical Zoom
[PICTURE SIZE] 14 M - 10.5 M
10 M
5 M 3 M or less
Max. enlargement 4 x 4.7 x 6.8 x 8.4 x
Extended Optical Zoom system
When the recording pixel level is set to [3 M ] (corresponding to 3 million pixels), 3
million pixels of the available pixel level in the center of the CCD are used in recording,
enabling higher magnification.
The enlargement ratio displayed in the bar on screen is an estimate.
Enlarging further [DIGITAL ZOOM]
Zoom 4 times further than Optical/Extended Optical Zoom.
(Note that, with Digital Zoom, enlarging will lessen picture quality.)
Display [REC] menu (15) Touch [ON]
Touch repeatedly until the desired item is
displayed.
Touch [DIGITAL ZOOM] Touch [EXIT]
Digital Zoom area is displayed within zoom bar on screen.
Digital Zoom area
16 x
e.g. With 16 x
• Zoom motion stops momentarily when entering
Digital Zoom range.
• Within Digital Zoom range, AF area is displayed
larger when the shutter button is pressed halfway.
• We recommend using a tripod and [SELFTIMER].
A greater degree of distortion may be generated by taking wider-angled pictures of
close objects, while using more telescopic zoom may result in more coloring appearing
around the outlines of objects.
The camera may make a rattling noise and vibrate when the zoom lever is operated –
this is not a fault.
When Extended Optical Zoom is used, zooming momentarily stops partway, but this is
not a malfunction.
Extended Optical Zoom cannot be used in the following cases:
[MACRO ZOOM], Motion Picture, [TRANSFORM], [HIGH SENS.], [HI-SPEED BURST],
[FLASH BURST], and [PHOTO FRAME] Scene Modes
Digital Zoom cannot be used in the following modes:
([INTELLIGENT AUTO] Mode) • [TRANSFORM], [HIGH SENS.], [HI-SPEED
BURST], [FLASH BURST], [FILM GRAIN] and [PHOTO FRAME] Scene Modes