Filter
Top Products
127
VQT2S62
Advanced (Recording pictures)
• Refer to P73 for details.
• Set to [ON] to display the [EXPO.METER] when correcting exposure,
performing program shift, setting aperture, and setting shutter speed.
• Unsuitable areas of the range are displayed in red.
• The Exposure Meter will only be displayed when the camera is set to
display information on the LCD monitor or viewfinder (P54)
• The [EXPO.METER] disappears after approximately
4 seconds if no operation is performed.
• Refer to P55 for details.
• Refer to P54 for details.
• Refer to P55 for details.
[MF GUIDE]
In Manual Focus, it is possible to check if the focus position is
near side or far side.
[OFF]
[ON]: MF guide is displayed on the screen when the focus
ring is rotated.
[PREVIEW HOLD]
This will set the operation of the [ ] button when displaying the
preview screen.
[OFF]: Preview screen is displayed only when the [ ] is
pressed.
It will return to previous screen when [ ] is released.
[ON]: Preview screen is displayed even after the [ ] is
released after pressing. (P87)
It will return to previous screen when [ ] is pressed
again.
[EXPO.METER]
Select whether or not to display the Exposure Meter when the mode dial is
switched to
³/±/´/² etc.
[OFF]/[ON]
[LVF DISP.STYLE]
This will set the display style of the viewfinder.
[]: Viewfinder style
[]: LCD monitor style
[LCD DISP.STYLE]
This will set the display style of the LCD monitor.
[]: Viewfinder style
[]: LCD monitor style
[PLAY ON LCD]
It will switch automatically to LCD monitor during the playback
when the viewfinder was selected during the recording.
[OFF]/[ON]
DMC-G10KPP-VQT2S62_eng.book 127 ページ ２０１０年４月２３日 金曜日 午後８時０分