Filter
Top Products
93
VQT2S62
Advanced (Recording pictures)
[REC] Mode: ¿
Taking Pictures that match the Scene being
recorded ( : Scene Mode)
When you select a Scene Mode to match the subject and recording situation, the camera
sets the optimal exposure and hue to obtain the desired picture.
Set the mode dial to [ ].
Press 3/4/2/1 to select the Scene Mode.
• You can also use the rear dial to select.
Press [MENU/SET] to set.
• The menu screen is switched to the recording screen in the
selected Scene Mode.
∫ About the information
•
If you press [DISPLAY] when selecting a Scene Mode in step 2,
explanations about each Scene Mode are displayed. (If you press
[DISPLAY] again, the screen returns to the Scene Mode menu.)
Note
•
To change the Scene Mode, press [MENU/SET], and return to above step 2 by pressing 1,
while selecting the Scene Mode menu [ ] by pressing 3/4/2/1.
• The Scene Mode flash setting is reset to the initial setting when the Scene Mode is changed
and then used.
• When you take a picture with a Scene Mode that is not adequate for the purpose, the hue of the
picture may differ from the actual scene.
• The following items cannot be set in Scene Mode because the camera automatically adjusts
them to the optimal setting.
– [SENSITIVITY]/Items other than [STANDARD] and [STANDARD] ( ) in Film Mode/
[METERING MODE]/[FLASH SYNCHRO]
¢
/[I.RESOLUTION]/[I.EXPOSURE]/
[ISO LIMIT SET]/[DIGITAL ZOOM]
¢ Can be set only when [PERIPHERAL DEFOCUS] is set.
Select this when you want to take pictures of a sunset view. This allows you to take vivid
pictures of the red color of the sun.
Note
•
The flash setting is fixed to [Œ].
ï [SUNSET]
DMC-G10KPP-VQT2S62_eng.book 93 ページ ２０１０年４月２３日 金曜日 午後８時０分