Filter
Top Products
155
VQT2S62
Connecting to other equipment
Note
•
Do not use any other USB connection cables except the supplied one. Use of cables other than
the supplied USB connection cable may cause malfunction.
• Turn the camera off before connecting or disconnecting the AC adaptor (P161).
• Before inserting or removing a card, turn the camera off, and disconnect the USB connection
cable.
¢ Only when [FAVORITE] is at [ON] and when there are pictures set as favorites. (P134)
Selecting a single picture and printing it
Press 2/1 to select the picture and then press
[MENU/SET].
• The message disappears in about 2 seconds.
Press 3 to select [PRINT START] and then press
[MENU/SET].
• Refer to P156 for the items which can be set before starting to
print the pictures.
• Press [MENU/SET] to cancel printing halfway.
• Disconnect the USB connection cable after printing.
Selecting multiple pictures and printing them
Press 3.
Press 3/4 to select an item and then press
[MENU/SET].
• If the print check screen has appeared, select [YES], and print
the pictures.
Item Description of settings
[MULTI SELECT]
Multiple pictures are printed at one time.
• Press 3/4/2/1 to select the pictures, and then When [DISPLAY] is
pressed, [
é] appears on the pictures to be printed. (When [DISPLAY] is
pressed again, the setting is canceled.)
• After the pictures have been selected, press [MENU/SET].
[SELECT ALL] Prints all the stored pictures.
[PRINT SET
(DPOF)]
Prints the pictures set in [PRINT SET] only. (P143)
[FAVORITE]
¢
Prints the pictures set as favorites only. (P134)
PictBridge
MULTI PRINT
100
_
0001100
100
_
_
0001
0001
100
_
0001
PLEASE SELECT
THE PICTURE TO PRINT
SELECT
PRINT
MENU
OFF
1
CANCEL
SELECT
SET
PRINT START
PRINT WITH DATE
NUM. OF PRINTS
PAPER SIZE
PAGE LAYOUT
SINGLE SELECT
MENU
CANCEL
SELECT
SET
MENU
MULTI SELECT
SELECT ALL
PRINT SET (DPOF)
FAVORITE
PictBridge
DMC-G10KPP-VQT2S62_eng.book 155 ページ ２０１０年４月２３日 金曜日 午後８時０分