Filter
Top Products
VQT2S62
170
Others
[NO ADDITIONAL SELECTIONS CAN BE MADE]
•
The number of pictures, which can be set at one time when [MULTI] has been selected for
[DELETE MULTI] (P53), [FAVORITE] (P134), [TITLE EDIT] (P135), [TEXT STAMP] (P136) or
[RESIZE] (P139) has been exceeded.
> Reduce the number of pictures set, and then repeat the operation.
• More than 999 favorites have been set.
[CANNOT BE SET ON THIS PICTURE]
•
[TITLE EDIT], [TEXT STAMP] or [PRINT SET] cannot be set for pictures not based on the
DCF standard.
[MEMORY CARD ERROR
FORMAT THIS CARD?]
•
It is a format that cannot be used with this unit.
> Format the card again with the camera after saving necessary data on a PC etc. (P35)
[LENS NOT FOUND, OR “ ” SHOOT W/O LENS IS SET TO OFF.]/
[THE LENS IS NOT ATTACHED PROPERLY. DO NOT PUSH LENS RELEASE
BUTTON WHILE LENS IS ATTACHED.]/
[PLEASE CHECK THAT THE LENS IS ATTACHED CORRECTLY]
•
Do not press the lens release button while taking pictures.
• When using a Leica lens mount adaptor (DMW-MA2M or DMW-MA3R; optional), set
[SHOOT W/O LENS] (P128) to [ON] in the custom menu.
• Detach the lens once, and then attach it again without pressing the lens release button. (P18)
Turn on the power again, and if it is still displaying, contact the dealer.
[MEMORY CARD PARAMETER ERROR]/[THIS MEMORY CARD CANNOT BE USED]
> Use a card compatible with this unit. (P25)
• SD Memory Card (8 MB to 2 GB)
• SDHC Memory Card (4 GB to 32 GB)
• SDXC Memory Card (48 GB to 64 GB)
[INSERT SD CARD AGAIN]/[TRY ANOTHER CARD]
•
An error has occurred accessing the card.
> Insert the card again.
> Insert a different card.
[READ ERROR/WRITE ERROR
PLEASE CHECK THE CARD]
•
It has failed to read or write data.
> Remove the card after turning the power [OFF]. Insert the card again, turn the power on,
and try to read or write the data again.
• The card may be broken.
> Insert a different card.
[MOTION RECORDING WAS CANCELLED DUE TO THE LIMITATION OF THE
WRITING SPEED OF THE CARD]
•
Use a card with SD Speed Class
¢
with “Class 6” or higher when recording motion pictures.
¢ SD speed class is the speed standard regarding continuous writing.
• In the event that it stops even after using a “Class 6” card or higher, the data writing speed has
deteriorated so it is recommended to make a backup and then format (P35).
• Depending on the type of the card, motion picture recording may stop in the middle.
DMC-G10KPP-VQT2S62_eng.book 170 ページ ２０１０年４月２３日 金曜日 午後８時０分