Filter
Top Products
VQT2S62
44
Basic
Set the focus mode dial to [AFS].
• “AFS” is an abbreviation of “Auto Focus Single”. The focus is adjusted
when you press the shutter button halfway.
• Normally use the [AFS].
• Focus during the Burst Mode is fixed at the first picture. Refer to P64 for
details.
This mode allows you to compose a picture more easily by continuously focusing on the
movement of the subject while the shutter button is pressed halfway.
When taking pictures of a moving subject, the camera predicts the movement of the
subject and focuses on it. (motion prediction)
•
[AFC] will not operate with certain lenses. For details, refer to page 16.
Set the focus mode dial to [AFC].
• “AFC” is an abbreviation of “Auto Focus Continuous”. The camera is
continuously focusing on the subject while the shutter button is pressed
halfway.
• It may take time to focus on the subject if you rotate the zoom ring from
Wide to Tele or suddenly change the subject from a distant one to a
nearby one.
• Focusing will continue even after the shutter button is pressed during the
Burst Mode. Refer to P64 for details.
• Set the [PRE AF] of [CUSTOM] menu item (P125) when you would like to set the focus before
pressing the shutter button halfway.
• Focus sound will not be heard in [AFC] even if the subject comes into focus. Also, AF area will
not be displayed if the AF Mode is set to [ ].
• When brightness is not enough, the mode will turn to [AFS] and in that case the AF area will be
displayed and the focus sound will beep when the subject comes into focus.
• Press the shutter button halfway again when it is difficult to focus on the subject.
Set the focus mode dial to [MF].
• For details, refer to P73.
Setting the Focus Mode (AFS/AFC/MF)
Fix the focus by pressing the shutter button halfway (AFS)
Continuously focusing on a subject (AFC)
Take a picture with Manual Focus (MF)
DMC-G10KPP-VQT2S62_eng.book 44 ページ ２０１０年４月２３日 金曜日 午後８時０分