VQT2S62
30
Preparation
Setting the Quick Menu
By using the Quick Menu, some of the menu settings can be easily found.
•
The features that can be adjusted using Quick Menu are determined by the mode or a display
style the camera is in.
Press [Q.MENU] to display the Quick Menu in recording
status.
Press 3/4/2/1 or rotate the rear dial to select the menu item and
the setting.
• Setup method is different as following depending on the displayed screen during
recording. Refer to P54 about the displayed screen.
[ ] (LCD monitor style)
•
Proceed to step 4 below after selecting the item and settings.
[ ] (Finder style)
•
Select the item, press the rear dial, and then select the setting.
Press [MENU/SET] or the rear dial to set the menu.
Press [Q.MENU] to close the Quick Menu.
• You can also press the shutter button halfway to close the Quick Menu.
9
PPP
AWB
STDSTDSTD
3 303 30
AUTOAUTOAUTO
AFS
9
PP
AWB
STDSTDSTD
3 303 30
AUTOAUTOAUTO
AFS
9
PP
AWB
STDSTDSTD
3 303 30
AUTOAUTOAUTO
AFS
or
DMC-G10KPP-VQT2S62_eng.book 30 ページ 2010年4月23日 金曜日 午後8時0分