Filter
Top Products
85
VQT2S62
Advanced (Recording pictures)
• We recommend using a tripod when the shutter speed is slow.
• When the flash is activated, the shutter speed cannot be set to faster than 1/160th of a second
in Shutter-Priority AE Mode. (P60)
• If you press the shutter button fully when the shutter speed is slow, the shutter speed on the
screen counts down in Shutter-Priority AE Mode.
• [ ] and [ ] cannot be set for Shutter-Priority AE Mode.
• The [SENSITIVITY] is automatically set to [AUTO] when you switch the Recording Mode to
Shutter-Priority AE Mode while the [SENSITIVITY] is set to [ ] (Intelligent).
[REC] Mode: ²
Taking Picture by Setting the Exposure Manually
Determine the exposure by manually setting the aperture value and the shutter speed.
The Manual Exposure Assistance appears on the lower portion of the screen to indicate
the exposure.
Set the mode dial to [²].
Rotate the rear dial to set the aperture and
shutter speed.
• It will switch between aperture setting operation and
shutter speed setting operation every time the rear
dial is pressed.
• Rotate the rear dial to display the [EXPO.METER].
(P127)
• You can also set the focus manually by rotating the focus mode dial to [MF]. (P73)
Press the shutter button halfway.
A Manual Exposure Assistance
• Set the aperture value and the shutter speed again
when the exposure is not adequate.
Take the picture.
∫ Manual Exposure Assistance
•
The Manual Exposure Assistance is an approximation. We recommend checking the pictures
on the playback screen.
The exposure is adequate.
Set to faster shutter speed or larger aperture value.
Set to slower shutter speed or smaller aperture value.
A
DMC-G10KPP-VQT2S62_eng.book 85 ページ ２０１０年４月２３日 金曜日 午後８時０分