Filter
Top Products
VQT2S62
82
Advanced (Recording pictures)
Press 2/1 to select a film.
Press 3/4 to select an item and 2/1 to adjust.
• You can also use the rear dial to adjust.
• Registered settings are memorized even if the camera is
turned off.
Press 3/4 to select the [MEMORY] and then press [MENU/SET].
Press 3/4 to select an item, and then press
[MENU/SET].
• You can register 2 settings. ([MY FILM 1] and [MY FILM 2])
(After registering, the Film Mode name that was registered
previously is displayed.)
• [STANDARD] is registered in [MY FILM 1] and [MY FILM 2] at
the time of purchase.
Press [MENU/SET] to close the menu.
• You can also press the shutter button halfway to close the menu.
Note
•
Noise may become visible when you take pictures in dark places. To avoid picture noise, we
recommend setting [NOISE REDUCTION] towards [_] or setting the items except [NOISE
REDUCTION] towards [`] to take pictures.
• If you adjust a Film Mode, [_] is displayed beside the Film Mode icon on the screen.
• You cannot adjust [SATURATION] in the black and white settings in Film Mode.
• Film Mode cannot be adjusted in the Intelligent Auto Mode, Advanced Scene Mode and Scene
Mode.
Adjusting each Film Mode to the desired setting
Item Effect
[CONTRAST]
[r]
Increases the difference between the brightness and the
darkness in the picture.
[s]
Decreases the difference between the brightness and the
darkness in the picture.
[SHARPNESS]
[r] The picture is sharply defined.
[s] The picture is softly focused.
[SATURATION]
[r] The colors in the picture become vivid.
[s] The colors in the picture become natural.
[NOISE
REDUCTION]
[r]
The noise reduction effect is enhanced. Picture resolution may
deteriorate slightly.
[s]
The noise reduction effect is reduced. You can obtain pictures
with higher resolution.
S
DMC-G10KPP-VQT2S62_eng.book 82 ページ ２０１０年４月２３日 金曜日 午後８時０分