Filter
Top Products
VQT2S62
34
Preparation
¢1 When [VIDEO OUT] is set to [PAL]
¢2 When [VIDEO OUT] is set to [NTSC]
• Interlace method/progressive method
i= interlace scanning is scanning the screen with half of the effective scanning lines every
1/60 seconds, where p= progressive scanning is a high density image signal that is scanning
the screen with all the effective scanning lines every 1/60 seconds.
The [HDMI] terminal on this unit is compatible with high-definition output [1080i]. It is necessary
to have a compatible TV to enjoy progressive and high-definition images.
• If the images are not output on the TV when the setting is [AUTO], match with the image format
your TV can display, and select the number of effective scanning lines. (Please read the
operating instructions for the TV.)
• This will work when the HDMI mini cable (optional) is connected.
• Refer to P147 for details.
• This will work when the HDMI mini cable (optional) is connected.
• Refer to P149 for details.
[HDMI MODE]
Set the format for the HDMI output when playing back on the
HDMI compatible high-definition TV connected with this unit using
the HDMI mini cable (optional).
[AUTO]:
The output resolution is automatically set based on the
information from the connected TV.
[1080i]:
The interlace method with 1080 available scan lines is used for
output.
[720p]:
The progressive method with 720 available scan lines is used for
output.
[576p]
¢
1
/[480p]
¢
2
:
The progressive method with 576
¢
1
/480
¢
2
available scan lines is
used for output.
[VIERA Link]
Setup so this unit can be controlled by the remote control of the
VIERA equipment by automatically coupling this unit with the VIERA
Link compatible equipment using HDMI mini cable (optional).
[OFF]: Operation is performed with the buttons on this unit.
[ON]: Remote control operation of the VIERA Link
compatible equipment is enabled. (Not all operations
are possible)
Button operation of the main unit will be limited.
} [SCENE MENU]
Set the screen that is displayed when the mode dial is set to ,
, , , and .
[OFF]: The recording screen in the currently selected
Advanced Scene Mode (P88) or Scene Mode (P93)
appears.
[AUTO]: The Advanced Scene Mode or Scene Mode menu
screen appears.
DMC-G10KPP-VQT2S62_eng.book 34 ページ ２０１０年４月２３日 金曜日 午後８時０分