Filter
Top Products
27
VQT2S62
Preparation
Note
•
The clock is displayed when [DISPLAY] is pressed several times during recording.
• You can set the year from 2000 to 2099.
• If the clock is not set, the correct date cannot be printed when you stamp the date on the
pictures with [TEXT STAMP] (P136) or order a photo studio to print the pictures.
• If the clock is set, the correct date can be printed even if the date is not displayed on the screen
of the camera.
Setting the Menu
This camera offers menu selections that allow you to customize its operation to maximize
your picture taking experience.
In particular, the [SETUP] menu contains some important settings relating to the camera’s
clock and power. Check the settings of this menu before proceeding to use the camera.
Note
•
There are functions that cannot be set or used depending on the modes or menu settings being
used on the camera due to the specifications.
! [REC] Mode menu (P113 to 122) [SETUP] menu (P31 to 35)
• This menu lets you
set the aspect ratio,
number of pixels and
other aspects of the
pictures you are
recording.
• This menu lets you
perform the clock
settings, select the
operating beep tone
settings and set
other settings which
make it easier for
you to operate the camera.
[MOTION PICTURE] Mode menu
(P122 to 123)
[MY MENU]
• This menu lets you
set the setting for
motion pictures such
as recording quality.
–
The [MOTION PICTURE]
Mode menu is only
displayed when in Motion
Picture Mode.
• Up to 5 menu items
used recently can be
memorized. Items
used a lot can be
recalled easily.
[CUSTOM] menu (P123 to 128) ( [PLAYBACK] Mode menu (P131 to 145)
• Operation of the unit,
such as displaying of
the screen and
button operations,
can be set up
according to your
preferences. Also, it
is possible to register the modified settings.
• This menu lets you
set the Protection,
Cropping or Print
Settings, etc. of
recorded pictures.
DMC-G10KPP-VQT2S62_eng.book 27 ページ ２０１０年４月２３日 金曜日 午後８時０分