Filter
Top Products
VQT2S62
78
Advanced (Recording pictures)
You can set the color temperature manually for taking natural pictures in different lighting
conditions. The color of light is measured as a number in degrees Kelvin. As the color
temperature increases, the picture becomes more bluish. As the color temperature
decreases, the picture becomes more reddish.
Select [ ] and then press 3.
Press 3/4 to select the color temperature and
then press [MENU/SET].
• You can set a color temperature from [2500K] to [10000K].
• You can also use the rear dial to set.
You can finely adjust the White Balance when you cannot acquire the desired hue by
setting the White Balance.
Select the White Balance and then press 4.
Press 3/4/2/1 to adjust the White Balance and
then press [MENU/SET].
Note
•
If you finely adjust the White Balance to A (amber), the White Balance icon on the screen will
change to orange. If you finely adjust the White Balance to B (blue), the White Balance icon on
the screen will change to blue.
• If you finely adjust the White Balance to G_ (green) or M` (magenta), [_] (green) or [`]
(magenta) appears beside the White Balance icon on the screen.
• Press [DISPLAY] to return to the center point.
• Select the center point if you are not finely adjusting the White Balance.
• The White Balance fine adjustment setting is reflected in the picture when using the flash.
• You can finely adjust the White Balance independently for each White Balance item.
• The White Balance fine adjustment setting is memorized even if the camera is turned off.
• The White Balance fine adjustment level returns to the standard setting (center point) in the
following cases.
– When you reset the White Balance in [ ] or [ ]
– When you reset the color temperature manually in [ ]
Setting the color temperature
Finely adjusting the White Balance [ ]
2 : A (AMBER: ORANGE)
1 : B (BLUE: BLUISH)
3 :
G_ (GREEN: GREENISH)
4 : M` (MAGENTA: REDDISH)
1
2
DMC-G10KPP-VQT2S62_eng.book 78 ページ ２０１０年４月２３日 金曜日 午後８時０分