Filter
Top Products
177
VQT2S62
Others
• This is a characteristic of the drive system of the viewfinder of this unit, and it is not a
malfunction. There will be no problem with the recorded image.
• You can display the pictures without being rotated when [ROTATE DISP.] (P142) is set to
[OFF].
• You can rotate pictures with the [ROTATE] function. (P142)
• You can only display the pictures rotated if you use a lens (P15) that supports the Direction
Detection Function (P36) and [ROTATE DISP.] is set to [ON].
• Did you press [(]?
• Is the card inserted?
• Is there a picture on the card?
• Is this a picture whose file name has been changed in the PC? If it is, it cannot be played back
by this unit.
• Has [PLAYBACK MODE] been set for playback?
> Change to [NORMAL PLAY]. (P133)
• Is this a non-standard picture, a picture which has been edited using a PC or a picture which
was taken by another make of digital camera?
• Did you remove the battery immediately after picture-taking or did you take the picture using a
battery with a low remaining charge?
> Format the data to delete the pictures mentioned above. (P35)
(Other pictures will be deleted as well and it will not be possible to restore them.
Therefore, check well before formatting.)
•
Is the clock in the camera set properly? (P26)
• Images edited on a PC or images recorded on other cameras might display a different date to
the recorded date during the Calendar Playback.
You see red, green, or blue flashes when you move your eyes in the viewfinder,
or when the camera is moved rapidly.
Playback
The picture being played back is not rotated, or is rotated in an unexpected
direction, when displayed.
The picture is not played back.
There are no recorded pictures.
The folder number and the file number are displayed as [—] and the screen turns
black.
Images with different date as recorded date are played back in the Calendar
Playback.
White round spots like soap bubbles appear on the recorded picture.
•
If you take a picture with the flash in a dark place or indoors, white round
spots may appear on the picture caused by the flash reflecting of particles of
dust in the air. This is not a malfunction.
A characteristic of this is that the number of round spots and their position
differ in every picture.
DMC-G10KPP-VQT2S62_eng.book 177 ページ ２０１０年４月２３日 金曜日 午後８時０分