Filter
Top Products
VQT2S62
36
Preparation
Holding and using Your Camera
• Do not cover the flash, the AF Assist Lamp
A or the microphone B with your fingers
or other objects.
• Hold the camera gently with both hands, keep
your arms still at your side and stand with your
feet slightly apart.
• Be careful not to move the camera when you
press the shutter button.
• Do not touch the front of the lens. (P167)
• When taking pictures, make sure your footing
is stable and there is no danger of colliding
with another person, an object etc.
Pictures recorded with the camera held vertically are played back vertically (rotated). (Only
when [ROTATE DISP.] (P142) is set to [ON])
•
The Direction Detection Function may not operate correctly if recording is performed with the
camera aimed up or down.
• Motion pictures taken with the camera held vertically are not displayed vertically.
• You can only use the Direction Detection Function when using a compatible lens.
(Refer to the catalogue, website etc. for compatible lenses.)
Press [LVF/LCD] to switch the
monitor screen.
A Viewfinder
B LCD monitor
C [LVF/LCD] button
D Eye cup
• You can switch between LCD (LCD monitor)
display and LVF (viewfinder) display.
• Switching via the [LVF/LCD] button will be
maintained even when the power of the digital camera is turned [OFF].
Tips for taking good pictures
Direction Detection Function
Switching the LCD monitor/Viewfinder
DMC-G10KPP-VQT2S62_eng.book 36 ページ ２０１０年４月２３日 金曜日 午後８時０分