With other products
106
VQT1J42
ª If the image or audio from this unit does not appear on the TV
≥ Check the connections.
≥ Check that the plugs are inserted as far as they go.
≥ Check the TV’s input setting (input switch). (For more information, please read the operating
instructions for the TV.)
≥ If the images are not displayed correctly on a wide-screen TV, adjust the setting in screen mode on
the TV. (For more information, please read the operating instructions of the TV.) If the pictures are
displayed squeezed horizontally on a regular TV (4:3), change the setting on this unit. (l 107)
≥ Use the AC adaptor to free you from worrying about the battery running down.
1 Connect this unit to a TV with the AV cable (supplied).
A AV cable (supplied)
2 Set the mode dial to to turn on the power.
3 Select the video input on the TV that this unit is connected to.
Example:
Select the [Video 2] channel etc.
(The name of the channel may differ depending on the cable.)
4 Start playback on this unit.
The image and audio are output on the TV.
3 Connecting with the AV cable (supplied)
VIDEO
PHOTO
VQT1J42ENG.book 106 ページ 2007年7月20日 金曜日 午前10時36分