Filter
Top Products
Before using
16
VQT1J42
If you connect this unit to a Panasonic TV compatible with EZ Sync
™
(HDAVI Control
™
) A with a HDMI
cable (optional) B, you can use the remote control for the TV for playback. Refer to the operating
instructions of the TV for details.
≥ Pictures recorded in STD mode cannot be played back.
ª What is EZ Sync
™
?
≥ This function allows you to use your remote control for the Panasonic TV for easy operations when
this unit has been connected to an EZ Sync
™
compatible device using a HDMI cable (optional) for
automatic linked operations.
* Not all operations are possible.
≥ EZ Sync
™
is a unique Panasonic function built on a HDMI control function using the standard HDMI
CEC (Consumer Electronics Control) specification. Linked operations with HDMI CEC compatible
devices made by other companies are not guaranteed.
≥ This unit is compatible with EZ Sync
™
Ver.2. EZ Sync
™
Ver.2 is the newest Panasonic version and is
also compatible with existing Panasonic EZ Sync
™
devices. (As of February 2007)
ª Other linked operations
Turning the power off:
If you turn the power off with the remote control for the TV, the power on this unit also turns off.
Automatic input switching:
If you connect with a HDMI cable and then turn on the power on this unit, the input channel on the TV
automatically switches to this unit’s screen. If the TV’s power is in standby status, it will turn on
automatically (if [Set] has been selected for the TV’s [Power on link] setting).
≥ Depending on HDMI terminal of the TV, the input channel may not switch automatically. In this case,
use the remote control for the TV to switch input. (For details on how to switch input, please read the
operating instructions for the TV.)
Using the remote control for the TV for playback
VQT1J42ENG.book 16 ページ ２００７年７月２０日 金曜日 午前１０時３６分