Filter
Top Products
Others
144
VQT1J42
Problem Check points
Even if a disc or an SD
card is formatted, it
cannot be used.
≥ Either this unit or the disc or SD card may be damaged. Please
consult a dealer. Use an SD card from 8 MB to 8 GB with this unit.
If the SD card is inserted
in this unit, it is not
recognized.
≥ Is the SD card formatted on a computer inserted?
# Use this unit to format SD cards. Please be aware that if an SD
card is formatted, then all the data recorded on the card will be
erased. (l 94)
If the SD card is inserted
in another device, it is not
recognized.
≥ Check that the device is compatible with the capacity or type of SD
card (SD Memory Card/SDHC Memory Card) that you inserted.
(l 28)
# Refer to the operating instructions of the device for details.
The indication
disappears.
The screen is frozen.
No operation can be
performed.
≥ Is this unit connected to a computer?
# No operation can be performed on this unit when it is connected
to a computer.
≥ Turn off the power to this unit. If the power cannot be turned off,
press the RESET button, or remove the battery or AC adaptor and
then reattach it. After that, turn on the power again. If normal
operation is still not restored, detach the power connected, and
consult the dealer who you purchased this unit from.
White round spots like
soap bubbles appear on
the recorded picture.
≥ If you take a picture with the flash in a
dark place or indoors, white round
spots may appear on the picture
caused by the flash reflecting of
particles of dust in the air. This is not a
malfunction.
A characteristic of this is that the number of round spots and their
position differ in every picture.
VQT1J42ENG.book 144 ページ ２００７年７月２０日 金曜日 午前１０時３６分