Filter
Top Products
Others
136
VQT1J42
CANNOT READ DISC.
PLEASE CHECK
CONDITION OF DISC.
There are scratches or dirt on the recording/playback side of the
disc. If there is dirt on the disc, use a soft cloth to wipe it. (l 30) If
the disc is scratched, insert a new one.
CHECK CARD. This card is not compatible or it cannot be recognized by the unit.
THIS CARD CANNOT
RECORD IN VIDEO MODE.
An 8 MB or 16 MB SD card on which motion pictures cannot be
recorded is inserted.
CARD LOCKED. The write protection switch on the SD card is set to LOCK. (l 29)
NOW ACCESSING.
PLEASE DO NOT REMOVE
CARD.
The data is being processed. Close the card slot cover and wait for
a while.
CARD FULL.
The SD card is full so no further data can be recorded. Delete
unnecessary files (l 86, 90) or insert a new SD card.
CANNOT OPERATE THIS
FUNCTION IN THIS MODE.
PRE-REC cannot be set in disc recording mode.
Or, you are trying to copy a disc in STD playback mode.
TOP MENU COULD NOT
BE CREATED.
Creating a top menu has failed.
There may be scratches or dirt on the recording/playback side of the
disc. If there is dirt on the disc, use a soft cloth to wipe it. (l 30)
CANNOT DIVIDE. THE
NUMBER OF SCENES IS
FULL.
The disc or SD card is full or the number of scenes has reached the
maximum limit so no further data can be divided. Delete
unnecessary scenes (l 86).
CANNOT OPERATE.
TEMPERATURE IS HIGH.
The temperature of the unit is high so it cannot be operated. Turn off
the power, wait until the unit cools and then turn on the power again.
CANNOT OPERATE.
TEMPERATURE IS HIGH.
PLEASE TURN OFF AND
WAIT A WHILE.
THIS BATTERY CANNOT
BE USED.
Use a battery that is compatible with this unit. (l 32)
You are attempting to connect an AC adaptor not compatible with
this unit. Use the supplied AC adaptor. (l 35)
If using a Panasonic battery compatible with this unit (l 32), eject
the battery and then insert it again. If the message appears even
after repeating this several times, this unit needs repair. Detach the
power and consult the dealer who you purchased this unit from. Do
not attempt to repair it by yourself.
AGS MODE ON-REC
PAUSED
The AGS function is activated. (l 52)
PUSH THE RESET
SWITCH.
An irregularity in the unit has been detected. Press the RESET
button to restart the unit. (l 145)
There may be scratches or dirt on the recording/playback side of the
disc. If there is dirt on the disc, use a soft cloth to wipe it. (l 30) If
the disc is scratched, insert a new one.
CHECK THE DISC AFTER
PUSHING THE RESET
SWITCH TO REPAIR THE
DATA.
VQT1J42ENG.book 136 ページ ２００７年７月２０日 金曜日 午前１０時３６分