Filter
Top Products
87
VQT1J42
Editing
The selected scene is encircled by a red frame.
≥ When the cursor button is pressed again, the
scene will be unselected.
≥ Up to 99 scenes (HD mode)/8 scenes (STD
mode) can be selected in succession.
4 (Only when [SELECT] is selected in step 2)
Press the button.
5 When the confirmation message
appears, select [YES], then press
the cursor button.
(Only when [SELECT] is selected in step 2)
To continue deleting other scenes
Repeat steps 3-5.
To complete editing
Press the MENU button.
≥ You can also delete scenes by pressing the
MENU button, selecting [EDIT SCENE] #
[DELETE] and then selecting [ALL SCENES]
(HD mode)/[ALL] (STD mode) or [SELECT].
≥ To delete an unwanted part of a scene, divide
the scene first, and then delete the
unnecessary part. (l 87)
≥ Scenes which cannot be played back (the
thumbnails are displayed as [ ]) cannot be
deleted.
≥ Protected scenes cannot be deleted.
≥ Do not open the card slot cover while deleting.
The deletion will stop.
≥ In case of [ALL SCENES] (HD mode)/[ALL]
(STD mode), the deletion may take time if
there are many scenes on the disc or SD card.
≥ Do not turn off this unit while deleting.
≥ When you delete scenes, use a battery with
sufficient battery power or use the AC adaptor.
≥ If you delete scenes recorded on other
products with this unit, all the data related to
the scenes may be deleted.
≥ It may not be possible to delete scenes that
have been divided to approximately 1 second
or less in STD mode.
To delete an unnecessary portion of a scene, first divide
the scene and then delete the unnecessary portion.
HD mode
¬Rotate the mode dial to select
and then select the [ ] or [] tab.
STD mode
¬Rotate the mode dial to select .
1
Press the MENU button, then
select [EDIT SCENE]
#
[DIVIDE]
#
[SET] (HD mode) or [YES] (STD
mode) and press the cursor button.
2 Select the scene to be divided,
then press the cursor button.
The selected scene is played back.
3 When you reach the area where
you want to divide the scene,
press the cursor button down to
set the dividing point.
Dividing a scene to delete
This is for dividing a scene into two to
delete an unnecessary portion.
VIDEO
MENU
VQT1J42ENG.book 87 ページ ２００７年７月２０日 金曜日 午前１０時３６分