Filter
Top Products
72
VQT1J42
Recording
≥ A gain value for each of the 2 built-in
microphones is displayed. (The input level of
the microphones cannot be set individually.)
3 Press the cursor button to set
and then press the MENU button
to finish the setting.
D Microphone input level meter
≥ Microphone input level meter is displayed on
the screen.
To return to automatic setting
Press the MENU button, then select [VIDEO] >
[MIC LEVEL] > [AUTO] and press the cursor
button.
≥ Adjust the gain value so that the last 2 bars of
the microphone input level on the center of the
screen are not red. (Otherwise, the sound is
distorted.) Select a lower setting for gain value
or set [MIC LEVEL] to [AUTO].
≥ The microphone input level meter displays the
microphone input level for the built-in
microphone with the larger volume.
≥ When [ZOOM MIC] is [ON], the volume will be
different depending on the zoom rate. Set
[ZOOM MIC] to [OFF] or set the microphone
input level after adjusting the zoom rate.
(l 62)
Parts where white saturation (color saturation) is
likely to occur (extremely brightly lit or shiny
parts) are displayed with diagonal lines (zebra
pattern).
¬Rotate the mode dial to select or
.
Press the MENU button, then select
[ADVANCED]
# [ZEBRA] # [ON] and
press the cursor button.
A Zebra pattern
≥ You can record an image with little white
saturation if you manually adjust the shutter
speed or brightness (iris/gain) (l 77).
To cancel the zebra display
Press the MENU button, then select
[ADVANCED] # [ZEBRA] # [OFF] and press
the cursor button.
≥ The zebra pattern does not appear on the
images actually recorded.
D
Zebra display
Displays portions of the image that
may be overexposed.
VIDEO
PHOTO
A
VQT1J42ENG.book 72 ページ ２００７年７月２０日 金曜日 午前１０時３６分