Filter
Top Products
105
Shooting Functions
4
The shutter speed and aperture value are displayed on the status screen
and LCD panel and in the viewfinder.
• Turn the rear e-dial (S) while pressing the m button to change the EV
compensation value. (p.115)
• Set the shutter speed and aperture values in increments of 1/3 EV or 1/2 EV.
Set the exposure steps in [1. EV Steps] in the [A Custom Setting 1] menu.
(p.116)
•In L mode, the sensitivity is fixed to [AUTO].
AF.S
1/
ISO
1000
100
4.5
F
11223344+5
-
5
AWB
[
37
]
TAv
AUTO
JPEG
14M
Exposure Warning
If the subject is too bright or too dark, the
sensitivity will blink on the status screen
and LCD panel and in the viewfinder. In
this sort of situation, change the shutter speed and aperture. When
the indication stops blinking, you can take the picture with proper
exposure.
Use a commercially available ND (Neutral Density) filter if the subject
is too bright. Use a flash if it is too dark.